Vandal-Resistant
Smart Card Reader

Combat the cost of replacing and repairing smart card reader/writers by installing this vandal-resistant Model 130 Smart Card Reader

Vandal-resistant Design
Minimize your equipment downtime with the Model 130 Smart Card Reader. Specifically engineered for public terminal applications, this chip card reader/connector features a large debris slot/half-card dropout* for jam-proof operation. The optional security gate* prevents the insertion of foreign material into the connector. Ideal for vending applications.

Long-lasting Performance
To further reduce operating and replacement costs, the Model 130 Smart Card Connector is engineered for at least 500,000 operations.

Options Add Value
The unit is ISO 7816 compatible and offers multiple mounting options (front and side). A Security Gate is also available.

 ELECTRICAL
Output Signals: TTL levels: 0 to 5 VDC (magnetic data).
Data: One for each track (magnetics only).
Clock: One for each track, normally high, sample on low (magnetics only).
Media Detect: Created from magnetic head detecting flux reversals from a magnetic card.
Card Seated: Signal notifies host electronics that the card has been fully inserted (for magnetics) or is created after the IC connector has made contact with the IC card’s contacts (for smart card).
IC Signals (per ISO 7816) on connector.
Power: +5 VDC.
Current: 15 mA maximum (for three tracks of magnetic data).
Less than 50µA in idle mode.
Ground: 0 VDC (GND). Chassis Ground connected to GND and magnetic head.
 ENVIRONMENTAL
Operating Temperature: 32° F to 131° F (0° C to 55° C).
Storage Temperature: -40° F to 158° F (-40° C to 70° C).
Humidity: Maximum 95% non-condensing.
 RELIABILITY
Magnetic Head Life: 1,000,000 passes minimum.*
IC Card Connector: 500,000 cycles minimum (equivalent to 1,000,000 passes).* Contacts are gold-plated and exceed EMV life requirements for minimum resistance over the life of the reader.
Chassis and Bezel: 1,000,000 card cycles minimum.*
Magnetic Read Rate: Less than one error in 100,000 bits on cards conforming to ISO 7811-1/6
(not induced by operator error).**
Warranty: One year, parts and labor.

*All wear reliability numbers are based on operation in a laboratory environment.
**Based upon reading on withdrawal.

 Mechanical
Magnetic Stripe Formats: ISO 7811, F2F. Media with magnetic coercivity of 300 through 4,000 Oersted can be read.
Reading Speed: 5 to 60 inches per second.
Media Thickness: .025 to .035 inches. Maximum card thickness .035 inches.
Dimensions: Standard Bezel Length: 4.64 inches (117 mm). Width: 3.97 inches (101 mm).
Height: .389 inches (9.88 mm).
Compact Bezel Length: 4.2 inches (107.3 mm). Width: 2.5 inches (63 mm).
Height: .87 inches (22.2 mm).
Flush-Mount Bezel Length: 4.3 inches (109.2 mm). Width: 2.75 inches (69.9 mm).
Height: 2.75 inches (69.9 mm).
Options: Latch, Gate, LED indicator, “Fraud Detect”, and “Card Present” Signal.
Diagram
<% include("webtrends.inc"); %>