Kanematsu Swiftpro L10 Single-Side & L10D Duplex Card Lamination Module

Kanematsu Swiftpro L10 Single-Side & L10D Duplex Card Lamination Module

$2,399.00$2,899.00

Only 2 left in stock

  • Industrial Design for Demanding Environments
  • Single- or double-sided lamination (L10 or L10D)
  • Connects to Swiftpro K30, K30D & K60 card printers
  • Input either Manually or via Printer
  • 3 Levels of Laminate Security
  • Thin Over-laminates, clear or with Holographic
  • RFID protection of Laminates
  • laminate 16 Seconds per card

Description

Kanematsu SwiftPro Laminators (L10 & L10D)
High speed lamination for secure ID cards

Hologram printing with Swiftpro laminating modules

Hologram printing is a premium security measure to upgrade the level of forgery protection and generally increase the lifetime of your cards. Once slow, costly and complex, this procedure has become significantly faster and more cost-effective with modern industrial hologram printers. The Swiftpro Inline Lamination Modules work with regular as well as holographic laminate to offer you maximum flexibility.

The L10 model is capable of high-speed single -sided lamination, while the robust L10D takes care of the dual-sided card lamination. With as little as 16 seconds per card for one-sided and 30 seconds for double-sided lamination, these are also the fastest laminating modules available on the market. Both models rely on heat and pressure to bind a transparent film to the card’s surface. This film can be clear, matte or holographic, based on your needs.

How does a hologram printer work?

The hologram printing technique creates an illusion of depth: a two-dimensional image appears to be three-dimensional depending on how the light falls onto it. Since it is not yet possible to create an actual 3D image on a flat surface, the industrial hologram printing relies on holographic laminate that is similarly thermally bound to a card’s surface. A hologram printer can use pre-printed standardized holograms (such as Swiftpro ribbons and lamination films), as well as custom holograms that are exclusively made to match your specifications.

Use hologram printing for maximum forgery protection

It is no coincidence that custom holograms are widely applied to sensitive documents, such as employee or security badges, along with debit or credit cards. Similarly, governmental documents – for instance, driving licenses, national IDs and passports – rely on holographic printing to protect these documents from illicit copying.

As a security measure, hologram printing is extremely difficult to reproduce without reference to the original master hologram. Furthermore, conventional printing methods, such as simple photocopying or printing, cannot stand the pace to a holographic printer. Therefore, reproduced holograms often stand out visually and a professional can usually spot a counterfeit card with the naked eye. In sum, holographic printing is a reliable forgery prevention measure.

As an added benefit, holographic laminate is visually striking and can contribute to the perceived value, as well as provide a higher level of security to your customers.

Optimize costs and card lifetime with a holographic printer

An additional “side effect” of holographic printing using a lamination module is the increased durability of your cards. Whether clear, matte or holographic – a laminate boosts the resistance of your cards towards water damage and tampering, so you can avoid reissuing replacement cards as often.

The Swiftpro Inline Lamination Modules can be seamlessly combined with Swiftpro regular ID card printers. For instance, the appropriate joining plate is all you need to attach it to the K30 or K30D, or the K60 Retransfer Card Printer. The modules’ compact sizes and the availability of single or double sided-models offer you additional flexibility to match your budget and requirements. Thus, you can create tamper-resistant cards with an extra level of counterfeit protection.

Specification

  • Single Sided Lamination (L10)
  • Dual Sided Lamination (L10D)
  • Use Genuine Swiftpro Generic and Custom Laminates and Overlays
  • Single pass laminating for Dual sided Lamination
  • Use Custom and Generic Stock for same application (Front and Back)
  • Thermal Transfer Speed – 16 – 30 seconds per card (single- or double-sided)

Electrical

  • Temp +15°C – 28°C
  • Humidity 35%RH – 60RH (No Condensation)
  • AC100V – 240V
  • Wattage 170w L10 and 260w L10D

Physical Specification

  • Height: 360mm Without Card Stacker
  • Width: 210mm Without Card Stacker
  • Depth: 330mm Without Card Stacker
  • Weight: 8.5 KG (L10) 9.5 KG (L10D)

Card Specification

Safety Standards

  • Agency Listing: UL, CE, FCC, KC, CSA

 

 

Support & Downloads

Videos

Swiftpro ID Card Printer, Laser and Lamination Solution

You may also like…

Go to Top